APE Products

APE Products

APE and Maddman have joined forces with the new ION rampage board
Maddman will be providing the milling and installation services for APE
Milling the back of the frame to accept the key pad will be $25.00 plus shipping there will be an extra $5.00 in the price to cover the priority mail shipping costs
Milling the back of the frame to accept the key pad and board install will be $35.00 plus shipping
There will be an extra $5.00 in the price to cover the priority mail costs
Once you paypal us for milling you need to remove your frame and mail it to us at the address below, our turn around time is generally 5-7 days.
If you dont feel comfortable removing the frame you can mail the entire marker less the barrel and we will disassemble it and mill it and return it to you.

Mail frames and markers to:
Maddman Products
31463 W 153rd st
Excelsior Springs, MO 64024
Click for full size image
Click for full size image
NOTICE
We only mill stock frames
 
8 Standard Firing Modes
The Rampage™ ION board comes with 8 standard modes of fire.
Semi Automatic (one shot for each trigger pull and no shot on the release) Burst (fires from 2 to 5 Shots for each trigger pull and no shots on the release) Reactive (fires from 1 to 5 shots for each trigger pull and fires from 1 to 5 shots on the trigger release)
Full Automatic (continuous firing as long as the trigger is pressed)
PSP3 (3 Semi Automatic shots, then transactions to 3 shot burst)
NXL (3 Semi Automatic shots and Full Automatic on the 4th pull and hold)
and 2 Fully programmable Ramping modes!

User Definable Ramping
The Rampage™ ION board has two 3-step firing modes that are completely user definable. Choose from Semi-Automatic, Response, Reactive or Full Automatic firing modes in ANY combination. With the Rampage™ Ramping modes you decide each step of the way, the BPS rate, Ramping Pull Rate, Reset Rate and more. Each of these modes has 14 individual Setpoints with over 237 Trillion combinations! TOTAL CONTROL!
APE RAMPAGE ION board
Priced too low to advertise add to your cart to see price
Complete Drop in solution! This item comes already soldered together with Switch, Capacitor, Battery Connector, EXCLUSIVE PowerShot Solenoid and of course the Rampage board!

Just Replace your existing internals with ours!

Direct Circuit Board Replacement for the Existing E-Grip™
Features a state-of-the-art RISC Microcontroller
Weather resistant Conformal Coating
Extended Battery life - Almost 3 TIMES!
Push button mode selection to change Firing Mode
Visual LED Mode Indicator
APE RAMPAGE A5 board
Priced too low to advertise add to your cart to see price